A ULINK debug adapter connects your PC's USB port to your target system (via JTAG or a similar debug interface) and allows you to debug, trace and analyze embedded programs running on the target hardware. All ULINK adapters enable you to:
- Download programs to your target hardware
- Examine memory and registers
- Single-step through programs and insert multiple breakpoints
- Run programs in real-time
| - Program Flash Memory
- Connect to a target via JTAG or serial wire modes
- Debug ARM Cortex-M devices on-the-fly
- Examine trace information from ARM Cortex-M3/M4/M7 devices
|
ULINKpro: Debug, Serial Wire and Streaming Trace
| | - Flash Programming + Run-Control
- Memory + Breakpoint (access while running)
- Serial Wire Trace capturing up to 100 Mbit/sec (Manchester mode)
- 50 MHz JTAG clock speed
- ETM Trace Capturing up to 800 Mbit/sec
- Streaming Trace
|
ULINKpro D: Debug and Fast Serial Wire Trace
| | - Flash Programming + Run-Control
- Memory + Breakpoint (access while running)
- Serial Wire Trace capturing up to 100 Mbit/sec (Manchester mode)
- 50 MHz JTAG clock speed
|
ULINKplus: Debug, Serial Wire Trace, Test I/O, and Power Measurement
| | - Flash Programming + Run-Control
- Memory + Breakpoint (access while running)
- Serial Wire Trace capturing up to 50 Mbit/sec (UART mode)
- 20 MHz JTAG clock speed
- Runtime power measurement for energy optimisation
- I/Os for test automation and continuous integration
|
ULINK2: Debug and Serial Wire Trace
| | - Flash Programming + Run-Control
- Memory + Breakpoint (access while running)
- Serial Wire Trace capturing up to 1 Mbit/sec (UART mode)
- 10 MHz JTAG clock speed
|
ULINK-ME: Development Board Debug
| | - Flash Programming + Run-Control
- Memory + Breakpoint (access while running)
- Serial Wire Trace capturing up to 1 Mbit/sec (UART mode)
- 10 MHz JTAG clock speed
- Note: ULINK-ME is only delivered and supported as part of Keil or OEM Starter Kits. It is not guaranteed to work with custom hardware.
|