Building a safe and secure embedded world

Delivering industrial network health and happiness

Diagnostic tools to keep your network running

Remote and on-site industrial networking and diagnostics tools

Our comprehensive range of diagnostic tools are designed to prevent failures before production grinds to a halt, and quickly get you back on track should your network require maintenance.

Additionally, the tools can easily be used by staff with both basic and expert engineering knowledge.

These products enable both on-site and remote monitoring and diagnostics. Whether your facility is focussing on keeping a safe distance between co-workers, eliminating travel between sites or just trying to carry on producing vital supplies while key personnel are self isolating, we have the tools to help.

The tabs below will make choosing the right product for your network easier and clearer than before. However, as no two networks are the same, please feel free to contact Dave Tomlin on 024 7669 2066 if you need any assistance or to request a quote.

 

 

     PROFIBUS Tester 5     

     PROFIBUS PA Tester    

     TH LINK PROFIBUS     

    smartLink HW-DP    

    mobiLink     

     mobiLink Power   

PROFIBUS DP support

YNY
(Protocol only)
YNN

PROFIBUS PA support

Y
(optional)
YY
(Protocol only)
Y
(Protocol only)
YN

Handheld diagnostics

YYNNNN

PC-based diagnostics

YNYTBCNN

Cable testing

YNNNNN

Network discovery

YNNNNN

Permanent monitoring
& diagnostics

NNYYNN

Internal battery

YYNNNN

Data export

YYYTBCNN

GUI

YYNNNN

Acceptance testing

YNNTBCNN

Certification

NNNNNN

Access to data via HART-IP

NNNYNN

Ethernet connectivity

NNYYNN

Monitoring software available

PB Diag SuiteNTH ScopeTBCNN

Remote monitoring

NNYTBCNN

Failure identification & location

NNYTBCNN

Plant asset management
(via Pactware & Fieldcare)

NNYYYY

Device configuration

NNYYYY

OPC UA integration

NNYYNN

Class 2 master

NNYYYY

Remote gateway to
PROFIBUS network

NNYYYY

EX zone 1

NYNNY 

Power to PA devices

NNNNNY

Power to FF devices

NNNNNY

Power to Hart Devices

NNNNNY
 

More...

More...

More...

More...

More...

More...

 

 

        NetXpert XG         

 

     Ethernet Tester BC      

 

     TH LINK PROFINET      

Ethernet testing 1Gb
 
YYY
Ethernet testing 5Gb
 
YNN
Ethernet testing 10Gb
 
YNN
Cable test functionality
 
YYN
Cable test & recording
 
YNN
Network or cable certification
 
YNN
Network discovery
 
YNN
Handheld diagnostics
 
YYN
Permanent monitoring & diagnostics
 
NNY
Remote monitoring
 
NNY
Failure identification & location
 
YYY
Monitoring & field device management
 
NNY
OPC UA integration
 
NNY
PROFINET supervisor role
 
NNY
Network topology discovery
 
YNY
Acceptance testing & reporting
 
YNY
Testing for other Ethernet types
(eg: EtherCAT, Ethernet IP, general IT networks, etc)
YYY
Data export
 
YYY
Internal battery
 
YYN
Monitoring software
 
NNTH SCOPE
GUI
 
YYN
EX zone
 
NNN

 
More...More...More...

Fieldbus Shield Digital Leakage Current Clamp

The clamp measures leakage currents without breaking the circuit. Examples include leakage and fault currents as well as current pick-up of instruments. The clamp reliably detects even very small improper shield currents resulting from EMC problems.

Performance is in accordance with DIN VDE 0701/0702 and the German BetrSichV (BGV A3, VBG 4).

Find out more...

DSUB PROFIBUS Access Point and Terminator

Provides an access point for testing PROFIBUS networks if the D-sub connectors have no service socket or if the stations are connected via terminal block.

Comes complete with a PBMB adapter and 90° angled PROFIBUS connector with switchable terminating resistor, strain relief and screw terminal technology.

Find out more...

M12 Access Point IP68

Provides an access point for testing PROFIBUS networks with M12 connectors and Allows Testing the Bus During Operation

The service interface is inserted between two bus stations. When not in use, the service output of the T piece is closed with an end cap. At Baud rates of 1.5 Mbit/s or higher, use the supplied cable to ensure that the required minimum distance between bus stations is maintained.

Find out more...

Search formContactOnlineshop