Building a safe and secure embedded world

phyCORE®-i.MX 6UL Arm Cortex-A7 System on Module

The industrial phyCORE-i.MX 6UL is based on the NXP i.MX 6UltraLite processor. It is designed for energy-efficient and compact applications.

  • Industrial SOM with Linux
  • High performance, low energy
  • Suitable for IoT applications

It is well-suited for use in IoT applications due to its size of 36 mm x 36 mm and power consumption of under 50mW in idle mode.The phyCORE-i.MX 6UL System on Module has a economical bill of material. It is designed for industrial use and high volume production. This one-sided SOM offers solder contacts on the outsides.

PHYTEC has two phyCORE-i.MX6 UL variants available: one for use in industrial control systems without a display and one for use in HMI applications with manageable graphics applications. The SOM offers 128 MByte DDR3 RAM and 128 MByte NAND-Flash.

PHYTEC also offers an expanded SOM variant with 512 MByte RAM and 512 MByte Flash. This full-featured variant also supports extended temperature range for use in industrial applications.


  • Energy-efficient 
  • Cost-efficient
  • Includes Linux BSP
  • Available with industrial temperature range
  • 15 years long-term availability

Security features:

PHYTEC modules support comprehensive security features in hardware and software. All functions supported by the i.MX 8 processor as well as further information about their security concept can be found here.

Search formContactOnlineshop